Pay Information in Job Ads: What Should You Actually Publish?

SkillsTrust

• 4 minute read

In a previous article we looked at whether employers will need to publish pay information in job ads under the EU Pay Transparency Directive, and how member states are approaching this differently. 

This article picks up where that one left off; assuming you need to publish pay information in your job ads, what pay information should you include?

This is one of the most common questions we get and it is not as straightforward as it might seem. 

Let's start with what Article 5 of the Directive actually states: employers must provide applicants with information about "the initial pay or its range" for the position. 

The Directive explicitly permits either an initial pay figure or a pay range. That choice is a consequential one for employers. Each option comes with tradeoffs worth considering before you decide.

Option 1: Publish a Pay Range

Pay transparency laws for job seekers were introduced in US states in recent years and some employers responded by publishing extremely wide ranges. Netflix advertised a software engineer role at $90,000 to $900,000. Tesla posted $83,000 to $418,000 for a senior software engineer. The implicit logic was that a broad range satisfies the letter of the law while preserving maximum flexibility for employers.

We do not recommend this approach for several reasons: 

  • Wide ranges evade the spirit of pay transparency which is to give candidates genuinely useful information about expected pay. Regulators are clapping down on this in the US; California has restricted excessively broad ranges, and New Jersey introduced legislation capping range width at 60% of the minimum salary. There is little reason to expect EU regulators to take a more permissive approach.

  • Research published in the Harvard Business Review in February 2026, drawing on nearly 10 million US job postings, found that wide ranges deter women from applying. Researchers argue that the driver is financial uncertainty about where a candidate will actually land. 

It is worth being honest about why some employers publish extremely wide ranges. Often it is because they do not have a pay framework in place that would allow them to publish something more specific with confidence. A wide range is a visible indicator that the underlying work on job architecture and pay ranges has not yet been done.

If you are going to publish a range, keep it tight.

A common way to construct a meaningful range is to take approximately ±20% around the target budget for the role. A range constructed in this way is informative to candidates and gives hiring managers a consistent framework, which reduces the risk of pay decisions varying significantly in ways that are hard to explain later.

The main practical risk with any range is anchoring: candidates will tend to gravitate toward the top of whatever range is given and this can drive up salary costs over time. 

Option 2: Publish an Initial Pay Figure (Rather Than a Pay Range)

This option is less commonly discussed but is explicitly permitted under Article 5. In practice it means publishing a typical initial pay figure for the role alongside the objective criteria that will determine where an individual offer lands.

For example:

For candidates who meet the core requirements for this role, the initial pay is typically around €65,000. The exact offer will be determined using objective, gender-neutral criteria such as years of relevant experience, specific skills, and qualifications for the role.

The case for it

The HBR research tested almost exactly this approach and found it effectively eliminated the gender gap in application rates that wide ranges produce. It gives candidates a realistic anchor for expected pay, signals that pay decisions are structured rather than discretionary, and aligns closely with what the Directive is designed to achieve — eliminating the information asymmetry between employers and candidates on pay. 

The case against it

This approach requires solid foundations. The initial pay figure needs to be representative of what most qualifying candidates will actually be offered — not a floor that the employer fully departs from in practice. The criteria used internally for positioning actual offers in relation to the stated figure need to be objective and applied consistently. For example, candidates new to this role with 0-2 years experience will be positioned at the published starting pay figure, those with 3-5 years of experience will be positioned at the midpoint and those experienced in the role 6+ years of experience will be positioned at the maximum. Without clear positioning logic, this option is hard to defend.

One More Thing: What Does "Pay" Actually Mean?

The Directive defines "pay" broadly — beyond base salary to include complementary components, both cash and in kind. All of these need to be reflected in what you publish.

In practice, a compliant job ad entry will include all relevant pay components for the job. For example:

Senior Marketing Manager | Dublin (Hybrid)

Typical starting base pay: €65,000

Typical Performance bonus: up to 10% of annual salary | Employer pension: 5% | Car allowance: €5,000 per year | Stock options: available after one year | 30 days annual leave plus public holidays

Listing base pay alone and leaving everything else to the offer stage will not be sufficient.

The Bottom Line

The figure or range you publish in a job ad is only as credible as the pay framework behind it. These are three key things to act on before you publish:

Do the foundational work first. The Directive requires pay structures to be based on objective, gender-neutral criteria — covering skills, effort, responsibility, and working conditions — that enable meaningful comparison of roles across your organisation. Without that foundation, any figure or range you publish is difficult to defend and hard to apply consistently.

Check your internal pay equity. Your existing employees will see what you advertise and compare it to their own pay. Make sure the figure or range you publish is consistent with what you currently pay people in equivalent roles. Run a pay gap audit per job category now before you start to publish pay information.

Remember what this is for. Pay transparency is not just a compliance exercise. Done properly, it is an opportunity to demonstrate that your approach to pay is fair and clear which is increasingly what candidates and employees expect.

If you are still working through the foundational steps of job architecture and auditing pay gaps, check out these helpful articles on what the groundwork involves.

SkillsTrust helps organisations across Europe build the job architecture and pay frameworks needed to meet their obligations under the EU Pay Transparency Directive. Get in touch to find out more.



Read more articles

Michelle Dervan

2 Nov 2026

All About Averages | Pay Analytics 101

The Importance of the Average When talking about pay data, the term average appears time and time again, but what does it actually mean? Put simply, an average salary gives us one figure to help describe pay across a group of employees. It takes all the salary values from that group and calculates a figure that would represent a ‘typical’ employee in that group. This is useful because it allows us to compare pay between different employee groups without having to look at every individual salary. The average can become an even more powerful metric when we begin to understand and analyse the different ways it’s calculated. It might seem counterintuitive that a figure like the average can be calculated in different ways and possibly provide different answers. After all, how can the same set of salaries produce different averages? The key is that each method looks at the data differently, helping us bring a different part of the picture into focus. There are two types of average that are particularly important when it comes to understanding pay: the mean and the median. So, how do they work, and what can each tell us about pay? Let's introduce them using a simple example company, PeopleTech Ltd. The Mean: What would everyone earn if pay were shared equally? The mean is what many people think of when they hear the word average. It shows us what each employee would earn if the company's total pay were shared equally among everyone. In everyday conversation, the terms mean and average are often used interchangeably. However, this isn't technically accurate, as the mean is just one of the ways to calculate an average, as we'll explore later on. To calculate the mean, we simply add together all the salaries and divide the total by the number of employees. Let's look at the example company, PeopleTech Ltd. Imagine the five employees earn the following annual salaries: €30,000 + €40,000 + €40,000 + €50,000 + €100,000 = €260,000 PeopleTech Ltd. has a total annual salary bill of €260,000 across its five employees. To calculate the mean, we divide this total by five: €260,000 ÷ 5 = €52,000 So, the mean salary at PeopleTech Ltd. is €52,000. In other words, if the company's total salary bill were shared equally between all five employees, each person would receive €52,000. The mean is useful because it gives us an overall picture of pay across the company. However, as we'll see, it doesn't always reflect what most employees actually earn, particularly when there are significant differences between the highest and lowest salaries. The Median: What is the salary in the middle? But what happens when one or two employees earn significantly more than everyone else? This is where the median can give us a different perspective. While the mean looks at the total of all salaries, the median looks directly at the middle of the data. Imagine arranging all our employees in a straight line, from the lowest-paid to the highest-paid. The salary of the person standing in the middle would represent our median salary. Let's look at PeopleTech Ltd. again. Using the same salaries as before, we arrange them from lowest to highest: €30,000 | €40,000 | €40,000 | €50,000 | €100,000 The middle salary is €40,000, making this the median salary for PeopleTech Ltd. What makes the median particularly useful is that it is not affected by unusually high or low salaries, often referred to as outliers. In our example, let's assume the €100,000 salary belongs to the CEO, which is double the next highest salary. This unusually high salary pulls the mean upwards, making the average salary appear higher than what most employees actually earn. The median, however, is not affected by this unusually high salary. At €40,000, it gives us a different perspective on what a typical employee earns in PeopleTech Ltd. This is particularly useful for HR professionals because it helps us understand what employees typically earn, without the results being skewed by a small number of particularly high or low salaries. Neither figure is wrong. They simply tell us different things about how pay is distributed across the company. Looking at both together gives us a more complete picture than relying on either one alone. One thing to note: when there is an even number of employees, there won't be one person sitting exactly in the middle. In this case, we take the two middle salaries and calculate their average to find the median. How does this all relate to the EU Pay Transparency Directive? The EU Pay Transparency Directive requires employers to report on both the mean and median gender pay gap. These gaps are calculated by finding the average pay for male employees and the average pay for female employees, and then measuring the difference between them. The difference is expressed as a percentage of men's average pay. For example, a gender pay gap of +10% means that women's average pay is 10% lower than men's average pay. But why does the Directive want to look at both figures? The size of a company's mean gender pay gap and median gender pay gap can tell us different things about how pay is distributed across the organisation. If a company's mean gender pay gap is larger than its median gender pay gap, this could suggest that higher-paid employees are having a greater influence on the overall gap. Think back to our PeopleTech Ltd. example, where the CEO's €100,000 salary pulled the mean upwards. A similar effect could occur in an organisation where the pay gap between most male and female employees is relatively small, but a highly paid position, such as the CEO role, is occupied by a man. Even though the difference in pay across the wider workforce may be relatively modest, this one high salary could pull the mean upwards and result in a much larger overall gender pay gap. On the other hand, if a company's median gender pay gap is larger than its mean gender pay gap, this could suggest that the difference in pay is more evident across the wider workforce, rather than being driven primarily by a small number of highly or lower paid positions. In other words, the gap may be more noticeable among employees around the middle of the pay distribution, rather than being concentrated at the top. This could highlight wider differences in how men and women are paid across the organisation, and may warrant further investigation. It is important to remember that neither the mean nor the median tells us exactly why a gender pay gap exists. They are indicators that help us identify patterns and differences in pay, rather than explanations in themselves. By looking at both measures together, HR professionals can begin to build a clearer picture of pay within their organisation, identify areas that may need further investigation and take a more informed approach to understanding and addressing any gaps.

Read article

Michelle Dervan

2 Nov 2026

All About Averages | Pay Analytics 101

The Importance of the Average When talking about pay data, the term average appears time and time again, but what does it actually mean? Put simply, an average salary gives us one figure to help describe pay across a group of employees. It takes all the salary values from that group and calculates a figure that would represent a ‘typical’ employee in that group. This is useful because it allows us to compare pay between different employee groups without having to look at every individual salary. The average can become an even more powerful metric when we begin to understand and analyse the different ways it’s calculated. It might seem counterintuitive that a figure like the average can be calculated in different ways and possibly provide different answers. After all, how can the same set of salaries produce different averages? The key is that each method looks at the data differently, helping us bring a different part of the picture into focus. There are two types of average that are particularly important when it comes to understanding pay: the mean and the median. So, how do they work, and what can each tell us about pay? Let's introduce them using a simple example company, PeopleTech Ltd. The Mean: What would everyone earn if pay were shared equally? The mean is what many people think of when they hear the word average. It shows us what each employee would earn if the company's total pay were shared equally among everyone. In everyday conversation, the terms mean and average are often used interchangeably. However, this isn't technically accurate, as the mean is just one of the ways to calculate an average, as we'll explore later on. To calculate the mean, we simply add together all the salaries and divide the total by the number of employees. Let's look at the example company, PeopleTech Ltd. Imagine the five employees earn the following annual salaries: €30,000 + €40,000 + €40,000 + €50,000 + €100,000 = €260,000 PeopleTech Ltd. has a total annual salary bill of €260,000 across its five employees. To calculate the mean, we divide this total by five: €260,000 ÷ 5 = €52,000 So, the mean salary at PeopleTech Ltd. is €52,000. In other words, if the company's total salary bill were shared equally between all five employees, each person would receive €52,000. The mean is useful because it gives us an overall picture of pay across the company. However, as we'll see, it doesn't always reflect what most employees actually earn, particularly when there are significant differences between the highest and lowest salaries. The Median: What is the salary in the middle? But what happens when one or two employees earn significantly more than everyone else? This is where the median can give us a different perspective. While the mean looks at the total of all salaries, the median looks directly at the middle of the data. Imagine arranging all our employees in a straight line, from the lowest-paid to the highest-paid. The salary of the person standing in the middle would represent our median salary. Let's look at PeopleTech Ltd. again. Using the same salaries as before, we arrange them from lowest to highest: €30,000 | €40,000 | €40,000 | €50,000 | €100,000 The middle salary is €40,000, making this the median salary for PeopleTech Ltd. What makes the median particularly useful is that it is not affected by unusually high or low salaries, often referred to as outliers. In our example, let's assume the €100,000 salary belongs to the CEO, which is double the next highest salary. This unusually high salary pulls the mean upwards, making the average salary appear higher than what most employees actually earn. The median, however, is not affected by this unusually high salary. At €40,000, it gives us a different perspective on what a typical employee earns in PeopleTech Ltd. This is particularly useful for HR professionals because it helps us understand what employees typically earn, without the results being skewed by a small number of particularly high or low salaries. Neither figure is wrong. They simply tell us different things about how pay is distributed across the company. Looking at both together gives us a more complete picture than relying on either one alone. One thing to note: when there is an even number of employees, there won't be one person sitting exactly in the middle. In this case, we take the two middle salaries and calculate their average to find the median. How does this all relate to the EU Pay Transparency Directive? The EU Pay Transparency Directive requires employers to report on both the mean and median gender pay gap. These gaps are calculated by finding the average pay for male employees and the average pay for female employees, and then measuring the difference between them. The difference is expressed as a percentage of men's average pay. For example, a gender pay gap of +10% means that women's average pay is 10% lower than men's average pay. But why does the Directive want to look at both figures? The size of a company's mean gender pay gap and median gender pay gap can tell us different things about how pay is distributed across the organisation. If a company's mean gender pay gap is larger than its median gender pay gap, this could suggest that higher-paid employees are having a greater influence on the overall gap. Think back to our PeopleTech Ltd. example, where the CEO's €100,000 salary pulled the mean upwards. A similar effect could occur in an organisation where the pay gap between most male and female employees is relatively small, but a highly paid position, such as the CEO role, is occupied by a man. Even though the difference in pay across the wider workforce may be relatively modest, this one high salary could pull the mean upwards and result in a much larger overall gender pay gap. On the other hand, if a company's median gender pay gap is larger than its mean gender pay gap, this could suggest that the difference in pay is more evident across the wider workforce, rather than being driven primarily by a small number of highly or lower paid positions. In other words, the gap may be more noticeable among employees around the middle of the pay distribution, rather than being concentrated at the top. This could highlight wider differences in how men and women are paid across the organisation, and may warrant further investigation. It is important to remember that neither the mean nor the median tells us exactly why a gender pay gap exists. They are indicators that help us identify patterns and differences in pay, rather than explanations in themselves. By looking at both measures together, HR professionals can begin to build a clearer picture of pay within their organisation, identify areas that may need further investigation and take a more informed approach to understanding and addressing any gaps.

Read article

The information on this page is not intended to serve and does not serve as legal advice. All of the content, information, and material on this website are only for general informational use.

Copyright © 2026 SkillsTrust. All Rights Reserved.

The information on this page is not intended to serve and does not serve as legal advice. All of the content, information, and material on this website are only for general informational use.

Copyright © 2026 SkillsTrust. All Rights Reserved.

The information on this page is not intended to serve and does not serve as legal advice. All of the content, information, and material on this website are only for general informational use.

Copyright © 2026 SkillsTrust. All Rights Reserved.

The information on this page is not intended to serve and does not serve as legal advice. All of the content, information, and material on this website are only for general informational use.

Copyright © 2026 SkillsTrust. All Rights Reserved.