EU Pay Transparency: Will I Need to Put Salary Ranges in Job Posts?

SkillsTrust Team

• 4 minute read

One of the most frequently asked questions we get about the upcoming EU Pay Transparency Directive is whether employers will need to publish salary ranges in job posts.

HR Directors and C-level execs are particularly concerned about this requirement - will it make it harder to attract talent? Could it drive up salary costs? And, most importantly, could it cause friction between new hires and existing employees who were hired under different conditions?

Here’s the thing: the directive requires employers to share salary information “in a published job vacancy notice, prior to the job interview, or otherwise prior to the conclusion of any employment contract.”

But what does that actually mean? Do you need to post a salary range on every job advert once the legislation comes into force or can you share it in some other way (ex. by email to the candidate)?


Will I Need to Put Salary Ranges in Job Posts?

It depends. Each EU member state will transpose the Directive into its national law ahead of the June 7th 2026 effective date, and the rules might vary slightly depending on where you are in the EU. To give you a clearer picture of what this could look like in practice, we’ve examined how some early movers - Ireland, Poland, Belgium, and Sweden - are interpreting the directive.


The Changing Face of Pay Transparency

Ireland’s Draft Proposal Leans Towards Salary Levels or Ranges in Job Adverts

On 15th January 2025, the Irish government published a General Scheme of the Equality (Miscellaneous Provisions) Bill 2024 that transposes Article 5 of the EU Pay Transparency Directive. The draft provision requires employers to provide salary levels or ranges in job adverts. This is a step up from the requirements of the directive.


Poland Pushes For Pay Ranges On Job Postings

At the end of 2024, Poland published its proposed implementation approach with a draft amendment to its Labour Code. The legislation, currently under public scrutiny until early 2025, states that employers must include minimum and maximum salary ranges in job adverts. Of course this could change as a result of the consultation but it demonstrates the direction some governments would like to take. 


Belgium Builds On Its Existing Framework

The French Community of Belgium, also known as the Wallonia-Brussels Federation, became the first EU jurisdiction to transpose the EU Pay Transparency Directive into law. Although this took place in September 2024, it has yet to be transposed at the national level so provides an indication of the direction of travel.

The Wallonia-Brussels Federation law mandates immediate pay or pay range disclosure as soon as the job is announced in job postings. While this goes beyond the directive’s requirement for pay disclosure before the interview or contract stage it doesn’t appear to force employers to publish the range in job adverts.


Sweden Drafts Even More Comprehensive Coverage

Sweden's draft pay transparency legislation, published in May 2024, shows how a country with strong existing equality frameworks can still find ways to enhance its provisions. Their approach extends beyond the EU Directive by requiring employers to provide candidates with the salary range and collective agreement provisions for the role before the pay negotiation process begins. Not in the job advert.


What This Means for Your Company

Initial indications show three different approaches to sharing pay information:

  1. Ireland - potentially sharing pay ranges in job adverts.

  2. Sweden - sharing pay information before salary negotiations begin.

  3. Poland - potentially including pay ranges in job postings.

  4. Belgium - sharing pay information once a job has been advertised or offered.

Depending on whether the member state(s) in which you operate follow suit, you may well have to do the same. Or, you may choose to publish pay on job postings, even if it’s not a legal requirement. 

While this level of transparency brings a range of benefits, it also has the potential to cause problems if it’s not handled effectively. With employees able to see the advertised pay ranges for any job, they will want to know why different roles are paid the amounts they’re paid. And why their pay is what it is. 

If employees don’t understand your approach to pay equity, these kinds of questions can breed distrust and disengagement.

The key to overcoming these challenges is to lay the appropriate groundwork. We’ve unpacked what to consider to prepare your business for greater pay transparency in job postings:

  1. Ensure your pay rates are fair and objectively justifiable

It’s vital that you do the work to ensure your pay rates and ranges are appropriate for each job under EU pay transparency legislation. Depending on where your organisation is up to on its pay transparency journey, you may have a significant amount of work to do. 

This could include:

  • Building a compliant job leveling framework.

  • Carrying out external benchmarking to establish appropriate pay ranges for your roles, ensuring the ranges are competitive and appropriately aligned with the market data.

  • Checking for internal pay equity to understand whether the published range will drive a pay gap or identify a large discrepancy with employee salaries. 

Take a look at our article that covers all the steps to take to become pay transparency compliant.

  1. Implement a solid internal communications strategy

Before publishing salary ranges externally, ensure your internal pay communication plans are robust. Employees will inevitably compare their salaries with posted ranges, potentially raising questions about pay equity. 

It’s a good idea to have clearly documented policies and processes in place, removing any pay secrecy clauses and ensuring alignment with new transparency requirements. 

You’ll also need to create user-friendly pay transparency communications for employees and managers. This could include guides, FAQs, webinars, videos, emails, talking points documents and social posts. 

  1. Cross-border considerations 

If your organisation operates across multiple EU countries, employees in one location will be able to see different pay rates for the same job in another country. So you’ll need to be able to explain differences in pay between geographies. 

Also, if you have employees in one country where pay transparency is a legal requirement and in another where it isn’t - like Ireland and the UK - you might find different treatment causes issues. Consider developing a harmonised approach that meets the highest standards while accommodating local variations. This will ensure all employees benefit from pay transparency regardless of location.

Proactive Preparation Is The Key to Success

Ireland, Sweden, Belgium and Poland have shown that local implementation often exceeds the baseline requirements of the EU Directive. As a forward-thinking HR leader, the key to success lies in getting on the front foot in case a similar approach is taken around publishing pay in job postings in the jurisdictions you operate in.

By proactively completing the foundational work now, you’ll be well prepared to educate managers and build trust with employees. Whether you need to publish pay ranges on your job postings or not. 

SkillsTrust provides tools and services that make pay transparency simple for EU employers. To learn more, book a free call.

Read more articles

Michelle Dervan

2 Nov 2026

All About Averages | Pay Analytics 101

The Importance of the Average When talking about pay data, the term average appears time and time again, but what does it actually mean? Put simply, an average salary gives us one figure to help describe pay across a group of employees. It takes all the salary values from that group and calculates a figure that would represent a ‘typical’ employee in that group. This is useful because it allows us to compare pay between different employee groups without having to look at every individual salary. The average can become an even more powerful metric when we begin to understand and analyse the different ways it’s calculated. It might seem counterintuitive that a figure like the average can be calculated in different ways and possibly provide different answers. After all, how can the same set of salaries produce different averages? The key is that each method looks at the data differently, helping us bring a different part of the picture into focus. There are two types of average that are particularly important when it comes to understanding pay: the mean and the median. So, how do they work, and what can each tell us about pay? Let's introduce them using a simple example company, PeopleTech Ltd. The Mean: What would everyone earn if pay were shared equally? The mean is what many people think of when they hear the word average. It shows us what each employee would earn if the company's total pay were shared equally among everyone. In everyday conversation, the terms mean and average are often used interchangeably. However, this isn't technically accurate, as the mean is just one of the ways to calculate an average, as we'll explore later on. To calculate the mean, we simply add together all the salaries and divide the total by the number of employees. Let's look at the example company, PeopleTech Ltd. Imagine the five employees earn the following annual salaries: €30,000 + €40,000 + €40,000 + €50,000 + €100,000 = €260,000 PeopleTech Ltd. has a total annual salary bill of €260,000 across its five employees. To calculate the mean, we divide this total by five: €260,000 ÷ 5 = €52,000 So, the mean salary at PeopleTech Ltd. is €52,000. In other words, if the company's total salary bill were shared equally between all five employees, each person would receive €52,000. The mean is useful because it gives us an overall picture of pay across the company. However, as we'll see, it doesn't always reflect what most employees actually earn, particularly when there are significant differences between the highest and lowest salaries. The Median: What is the salary in the middle? But what happens when one or two employees earn significantly more than everyone else? This is where the median can give us a different perspective. While the mean looks at the total of all salaries, the median looks directly at the middle of the data. Imagine arranging all our employees in a straight line, from the lowest-paid to the highest-paid. The salary of the person standing in the middle would represent our median salary. Let's look at PeopleTech Ltd. again. Using the same salaries as before, we arrange them from lowest to highest: €30,000 | €40,000 | €40,000 | €50,000 | €100,000 The middle salary is €40,000, making this the median salary for PeopleTech Ltd. What makes the median particularly useful is that it is not affected by unusually high or low salaries, often referred to as outliers. In our example, let's assume the €100,000 salary belongs to the CEO, which is double the next highest salary. This unusually high salary pulls the mean upwards, making the average salary appear higher than what most employees actually earn. The median, however, is not affected by this unusually high salary. At €40,000, it gives us a different perspective on what a typical employee earns in PeopleTech Ltd. This is particularly useful for HR professionals because it helps us understand what employees typically earn, without the results being skewed by a small number of particularly high or low salaries. Neither figure is wrong. They simply tell us different things about how pay is distributed across the company. Looking at both together gives us a more complete picture than relying on either one alone. One thing to note: when there is an even number of employees, there won't be one person sitting exactly in the middle. In this case, we take the two middle salaries and calculate their average to find the median. How does this all relate to the EU Pay Transparency Directive? The EU Pay Transparency Directive requires employers to report on both the mean and median gender pay gap. These gaps are calculated by finding the average pay for male employees and the average pay for female employees, and then measuring the difference between them. The difference is expressed as a percentage of men's average pay. For example, a gender pay gap of +10% means that women's average pay is 10% lower than men's average pay. But why does the Directive want to look at both figures? The size of a company's mean gender pay gap and median gender pay gap can tell us different things about how pay is distributed across the organisation. If a company's mean gender pay gap is larger than its median gender pay gap, this could suggest that higher-paid employees are having a greater influence on the overall gap. Think back to our PeopleTech Ltd. example, where the CEO's €100,000 salary pulled the mean upwards. A similar effect could occur in an organisation where the pay gap between most male and female employees is relatively small, but a highly paid position, such as the CEO role, is occupied by a man. Even though the difference in pay across the wider workforce may be relatively modest, this one high salary could pull the mean upwards and result in a much larger overall gender pay gap. On the other hand, if a company's median gender pay gap is larger than its mean gender pay gap, this could suggest that the difference in pay is more evident across the wider workforce, rather than being driven primarily by a small number of highly or lower paid positions. In other words, the gap may be more noticeable among employees around the middle of the pay distribution, rather than being concentrated at the top. This could highlight wider differences in how men and women are paid across the organisation, and may warrant further investigation. It is important to remember that neither the mean nor the median tells us exactly why a gender pay gap exists. They are indicators that help us identify patterns and differences in pay, rather than explanations in themselves. By looking at both measures together, HR professionals can begin to build a clearer picture of pay within their organisation, identify areas that may need further investigation and take a more informed approach to understanding and addressing any gaps.

Read article

Michelle Dervan

2 Nov 2026

All About Averages | Pay Analytics 101

The Importance of the Average When talking about pay data, the term average appears time and time again, but what does it actually mean? Put simply, an average salary gives us one figure to help describe pay across a group of employees. It takes all the salary values from that group and calculates a figure that would represent a ‘typical’ employee in that group. This is useful because it allows us to compare pay between different employee groups without having to look at every individual salary. The average can become an even more powerful metric when we begin to understand and analyse the different ways it’s calculated. It might seem counterintuitive that a figure like the average can be calculated in different ways and possibly provide different answers. After all, how can the same set of salaries produce different averages? The key is that each method looks at the data differently, helping us bring a different part of the picture into focus. There are two types of average that are particularly important when it comes to understanding pay: the mean and the median. So, how do they work, and what can each tell us about pay? Let's introduce them using a simple example company, PeopleTech Ltd. The Mean: What would everyone earn if pay were shared equally? The mean is what many people think of when they hear the word average. It shows us what each employee would earn if the company's total pay were shared equally among everyone. In everyday conversation, the terms mean and average are often used interchangeably. However, this isn't technically accurate, as the mean is just one of the ways to calculate an average, as we'll explore later on. To calculate the mean, we simply add together all the salaries and divide the total by the number of employees. Let's look at the example company, PeopleTech Ltd. Imagine the five employees earn the following annual salaries: €30,000 + €40,000 + €40,000 + €50,000 + €100,000 = €260,000 PeopleTech Ltd. has a total annual salary bill of €260,000 across its five employees. To calculate the mean, we divide this total by five: €260,000 ÷ 5 = €52,000 So, the mean salary at PeopleTech Ltd. is €52,000. In other words, if the company's total salary bill were shared equally between all five employees, each person would receive €52,000. The mean is useful because it gives us an overall picture of pay across the company. However, as we'll see, it doesn't always reflect what most employees actually earn, particularly when there are significant differences between the highest and lowest salaries. The Median: What is the salary in the middle? But what happens when one or two employees earn significantly more than everyone else? This is where the median can give us a different perspective. While the mean looks at the total of all salaries, the median looks directly at the middle of the data. Imagine arranging all our employees in a straight line, from the lowest-paid to the highest-paid. The salary of the person standing in the middle would represent our median salary. Let's look at PeopleTech Ltd. again. Using the same salaries as before, we arrange them from lowest to highest: €30,000 | €40,000 | €40,000 | €50,000 | €100,000 The middle salary is €40,000, making this the median salary for PeopleTech Ltd. What makes the median particularly useful is that it is not affected by unusually high or low salaries, often referred to as outliers. In our example, let's assume the €100,000 salary belongs to the CEO, which is double the next highest salary. This unusually high salary pulls the mean upwards, making the average salary appear higher than what most employees actually earn. The median, however, is not affected by this unusually high salary. At €40,000, it gives us a different perspective on what a typical employee earns in PeopleTech Ltd. This is particularly useful for HR professionals because it helps us understand what employees typically earn, without the results being skewed by a small number of particularly high or low salaries. Neither figure is wrong. They simply tell us different things about how pay is distributed across the company. Looking at both together gives us a more complete picture than relying on either one alone. One thing to note: when there is an even number of employees, there won't be one person sitting exactly in the middle. In this case, we take the two middle salaries and calculate their average to find the median. How does this all relate to the EU Pay Transparency Directive? The EU Pay Transparency Directive requires employers to report on both the mean and median gender pay gap. These gaps are calculated by finding the average pay for male employees and the average pay for female employees, and then measuring the difference between them. The difference is expressed as a percentage of men's average pay. For example, a gender pay gap of +10% means that women's average pay is 10% lower than men's average pay. But why does the Directive want to look at both figures? The size of a company's mean gender pay gap and median gender pay gap can tell us different things about how pay is distributed across the organisation. If a company's mean gender pay gap is larger than its median gender pay gap, this could suggest that higher-paid employees are having a greater influence on the overall gap. Think back to our PeopleTech Ltd. example, where the CEO's €100,000 salary pulled the mean upwards. A similar effect could occur in an organisation where the pay gap between most male and female employees is relatively small, but a highly paid position, such as the CEO role, is occupied by a man. Even though the difference in pay across the wider workforce may be relatively modest, this one high salary could pull the mean upwards and result in a much larger overall gender pay gap. On the other hand, if a company's median gender pay gap is larger than its mean gender pay gap, this could suggest that the difference in pay is more evident across the wider workforce, rather than being driven primarily by a small number of highly or lower paid positions. In other words, the gap may be more noticeable among employees around the middle of the pay distribution, rather than being concentrated at the top. This could highlight wider differences in how men and women are paid across the organisation, and may warrant further investigation. It is important to remember that neither the mean nor the median tells us exactly why a gender pay gap exists. They are indicators that help us identify patterns and differences in pay, rather than explanations in themselves. By looking at both measures together, HR professionals can begin to build a clearer picture of pay within their organisation, identify areas that may need further investigation and take a more informed approach to understanding and addressing any gaps.

Read article

The information on this page is not intended to serve and does not serve as legal advice. All of the content, information, and material on this website are only for general informational use.

Copyright © 2026 SkillsTrust. All Rights Reserved.

The information on this page is not intended to serve and does not serve as legal advice. All of the content, information, and material on this website are only for general informational use.

Copyright © 2026 SkillsTrust. All Rights Reserved.

The information on this page is not intended to serve and does not serve as legal advice. All of the content, information, and material on this website are only for general informational use.

Copyright © 2026 SkillsTrust. All Rights Reserved.

The information on this page is not intended to serve and does not serve as legal advice. All of the content, information, and material on this website are only for general informational use.

Copyright © 2026 SkillsTrust. All Rights Reserved.